Tool Guides

Expert guides for every tool you need — from power saws to precision measuring instruments.

Choose tools by the job

Cut plywood and cabinet panels

Support both sides of the cut on a stable sacrificial surface. Choose a panel blade matched to the saw, arbor and material; test the finished-face orientation and scoring setting on a scrap. Set the guide square, allow for blade kerf and use suitable dust extraction.

Plan sheet cuts

Trim ceiling boards and furring

Use a tape, square and layout reference before repetitive cuts. Verify the miter-saw fence and stop, support long boards and keep offcuts clear. Select fasteners for the actual substrate and approved assembly, not only board thickness.

Ceiling preparation and layout

Drill and fasten dense hardwood

Use sharp bits and a separate countersink where the fastening system requires it. Make a test hole, verify edge distances and depth, and choose corrosion-compatible hardware. Follow the tool and fastener manufacturers’ setup and safety instructions.

Ipe machining and specification

Power Saws

Band Saw — Lumberama
Power Saws
$150-$300 for benchtop models, $400-$800 for 14-inch floor-standing, $800-$1,500 for 17-inch models, $1,500-$3,500+ for industrial sizes.

Band Saw

Top brands: Jet, Rikon, Grizzly, Laguna, Powermatic, WEN, Delta, Craftsm

A band saw uses a continuous loop blade running over two or three wheels to make precise curved cuts, resaw thick lumber

Read guide
Chainsaw — Lumberama
Power Saws
$100-$200 for small electric/battery, $200-$400 for mid-range battery, $250-$500 for homeowner gas models, $400-$1,000+ for professional gas chainsaws.

Chainsaw

Top brands: Stihl, Husqvarna, Echo, Oregon, Milwaukee, DeWalt, Makita, E

A chainsaw is a powerful portable cutting tool that uses a rotating chain with sharpened teeth to cut through wood at hi

Read guide
Circular Saw — Lumberama
Power Saws
$50-$150 for entry-level corded, $100-$200 for mid-range corded, $150-$350 for premium cordless, $200-$500+ for professional worm-drive or track-compatible models.

Circular Saw

Top brands: DeWalt, Milwaukee, Makita, Bosch, SKILSAW, Ridgid, Metabo HP

A circular saw is the most versatile portable power saw in any workshop or job site. Featuring a toothed blade that spin

Read guide
Jigsaw — Lumberama
Power Saws
$30-$80 for entry-level corded, $80-$150 for mid-range corded, $100-$200 for cordless, $150-$300 for premium barrel-grip models.

Jigsaw

Top brands: Bosch, DeWalt, Makita, Milwaukee, Festool, Metabo HPT, Ridgi

A jigsaw is the go-to power tool for cutting curves, circles, and intricate shapes in wood, metal, plastic, and other ma

Read guide
Miter Saw — Lumberama
Power Saws
$100-$200 for basic compound, $200-$400 for sliding compound, $350-$700 for premium sliding dual-bevel, $700-$1,200 for professional-grade 12-inch sliders.

Miter Saw

Top brands: DeWalt, Bosch, Makita, Milwaukee, Metabo HPT, Festool Kapex,

A miter saw is a precision crosscutting tool that pivots left and right to make angled miter cuts and tilts to create be

Read guide
Oscillating Multi-Tool — Lumberama
Power Saws
$30-$60 for basic corded, $60-$120 for mid-range corded, $100-$200 for cordless, $150-$350 for premium cordless kits with multiple accessories.

Oscillating Multi-Tool

Top brands: Fein (inventor of the OMT), DeWalt, Milwaukee, Bosch, Makita

An oscillating multi-tool (OMT) vibrates its accessory at high speed through a small arc of 2-4 degrees, enabling precis

Read guide
Reciprocating Saw — Lumberama
Power Saws
$50-$100 for basic corded, $100-$180 for mid-range corded, $130-$250 for cordless, $200-$400 for premium cordless with advanced features.

Reciprocating Saw

Top brands: Milwaukee (SAWZALL), DeWalt, Makita, Bosch, Ridgid, Metabo H

The reciprocating saw — commonly called a Sawzall (Milwaukee's trademark name) — is the ultimate demolition and rough-cu

Read guide
Scroll Saw — Lumberama
Power Saws
$80-$150 for basic models, $200-$400 for mid-range variable speed, $400-$700 for premium models, $700-$2,000+ for top-tier Hegner and Excalibur saws.

Scroll Saw

Top brands: DeWalt, WEN, Hegner, Excalibur, Delta, Rikon, JWET, Dremel,

A scroll saw is a precision cutting tool designed for intricate, detailed work in thin material. Its fine blade moves up

Read guide
Table Saw — Lumberama
Power Saws
$250-$500 for portable jobsite saws, $500-$1,000 for contractor saws, $800-$1,500 for hybrid saws, $1,500-$4,000+ for cabinet saws, $1,700-$5,000+ for SawStop models.

Table Saw

Top brands: SawStop, DeWalt, Bosch, Makita, Jet, Powermatic, Grizzly, Ri

The table saw is the centerpiece of most woodworking shops, delivering unmatched accuracy for rip cuts, crosscuts, dados

Read guide
Track Saw — Lumberama
Power Saws
$200-$400 for track-compatible circular saws with rail kits, $400-$700 for dedicated track saws, $700-$1,200 for premium Festool and Makita systems, $1,200+ for Festool TS 75 with full rail package.

Track Saw

Top brands: Festool, Makita, DeWalt, Bosch, Milwaukee, Triton, Kreg (Ada

A track saw (also called a plunge saw) rides along an extruded aluminum guide rail to produce perfectly straight, splint

Read guide

Drills & Drivers

Cordless Drill — Lumberama
Drills & Drivers
$40-$80 for 12V kits, $80-$150 for basic 18V/20V kits, $150-$250 for brushless kits with two batteries, $200-$350 for premium brushless kits.

Cordless Drill

Top brands: DeWalt, Milwaukee, Makita, Bosch, Ridgid, Ryobi, Craftsman,

The cordless drill is the single most essential power tool for DIYers and professionals alike. Combining a motor, adjust

Read guide
Doweling Jig — Lumberama
Drills & Drivers
$10-$25 for basic self-centering jigs, $25-$50 for mid-range (Wolfcraft, Milescraft), $70-$130 for premium systems (Jessem Doweling Jig Master), $150-$250 for high-precision systems (Dowelmax).

Doweling Jig

Top brands: Wolfcraft, Jessem, Dowelmax, Milescraft, Rockler, General To

A doweling jig guides your drill bit to create perfectly aligned holes for wooden dowel joints. Dowel joinery is one of

Read guide
Drill Press — Lumberama
Drills & Drivers
$100-$250 for benchtop models, $250-$500 for quality benchtop with variable speed, $400-$800 for floor-standing models, $800-$2,000+ for heavy-duty floor models.

Drill Press

Top brands: WEN, Jet, Delta, Grizzly, Powermatic, Rikon, Shop Fox, SKIL,

A drill press is a stationary drilling machine that delivers perfectly vertical, accurately positioned holes with consis

Read guide
Hammer Drill — Lumberama
Drills & Drivers
$50-$120 for standard hammer drill/drivers, $100-$250 for cordless hammer drill combo kits, $150-$350 for SDS-Plus rotary hammers, $300-$700+ for SDS-Max models.

Hammer Drill

Top brands: Bosch, DeWalt, Milwaukee, Makita, Hilti, Metabo HPT, Ridgid,

A hammer drill combines rotary drilling with a hammering action to bore through concrete, brick, block, stone, and other

Read guide
Impact Driver — Lumberama
Drills & Drivers
$50-$100 for 12V kits, $80-$150 for basic 18V/20V, $130-$250 for brushless models, $200-$350 for premium multi-speed kits.

Impact Driver

Top brands: Milwaukee, DeWalt, Makita, Bosch, Ridgid, Ryobi, Metabo HPT,

An impact driver delivers rotational force combined with concussive blows to drive screws and tighten fasteners with ast

Read guide
Pocket Hole Jig — Lumberama
Drills & Drivers
$25-$50 for mini/portable jigs, $50-$100 for standard systems (Kreg 320), $100-$170 for premium systems (Kreg 520/720), $350-$600+ for production benchtop systems (Kreg Foreman).

Pocket Hole Jig

Top brands: Kreg (industry leader), Massca, Milescraft, Wolfcraft, Gener

A pocket hole jig creates angled holes that accept self-tapping screws to join two pieces of wood together. This ingenio

Read guide

Sanders & Planers

Belt Sander — Lumberama
Sanders & Planers
$40-$80 for basic 3x18, $80-$150 for 3x21 variable speed, $120-$200 for 3x24 and 4x24, $150-$300 for professional models.

Belt Sander

Top brands: Makita, DeWalt, Porter-Cable, Bosch, Metabo HPT, Ridgid, WEN

A belt sander uses a continuous loop of sandpaper stretched between two rollers to aggressively remove material from fla

Read guide
Benchtop Planer — Lumberama
Sanders & Planers
$250-$400 for basic 12-13 inch models, $400-$600 for premium models (DeWalt DW735), $600-$1,000 for helical-head upgrades, $1,000-$3,000 for stationary floor models.

Benchtop Planer

Top brands: DeWalt, Makita, WEN, Ridgid, Grizzly, Jet, Powermatic, Craft

A benchtop planer (thickness planer) feeds rough lumber through a spinning cutterhead to produce boards of uniform thick

Read guide
Drum Sander — Lumberama
Sanders & Planers
$300-$600 for benchtop 10-16 inch models, $600-$1,200 for 19-inch benchtop, $1,200-$2,500 for floor-standing single drum, $2,000-$5,000+ for dual-drum and wide-format machines.

Drum Sander

Top brands: SuperMax (now Laguna), Jet, Performax, WEN, Grizzly, Powerma

A drum sander (also called a thickness sander) feeds workpieces through a sanding drum on a conveyor belt, producing uni

Read guide
Electric Hand Planer — Lumberama
Sanders & Planers
$60-$120 for basic 3-1/4 inch corded, $100-$200 for mid-range, $150-$300 for premium corded, $150-$300 for cordless, $200-$500 for wide-body models.

Electric Hand Planer

Top brands: Makita, DeWalt, Bosch, Milwaukee, Ridgid, WEN, Ryobi, Metabo

An electric hand planer is a portable power tool that shaves thin layers of wood using a spinning cutterhead with two or

Read guide
Palm Sander — Lumberama
Sanders & Planers
$20-$40 for basic models, $40-$70 for mid-range with dust collection, $60-$100 for premium corded, $80-$150 for cordless.

Palm Sander

Top brands: Makita, DeWalt, Black+Decker, Bosch, Ryobi, Craftsman, Ridgi

A palm sander (also called a quarter-sheet or finish sander) uses a vibrating rectangular pad to deliver fine, controlle

Read guide
Random Orbital Sander — Lumberama
Sanders & Planers
$30-$60 for basic corded, $60-$120 for mid-range variable speed, $100-$200 for cordless, $150-$350 for premium Festool and Mirka models, $400+ for Festool ETS EC.

Random Orbital Sander

Top brands: Festool, Makita, DeWalt, Bosch, Milwaukee, Mirka, Ridgid, Ry

A random orbital sander (ROS) spins its sanding pad in an orbital pattern while simultaneously rotating randomly, produc

Read guide

Measuring & Layout

Chalk Line — Lumberama
Measuring & Layout
$5-$10 for basic reels, $10-$20 for quality mid-range (Irwin, Stanley), $15-$30 for premium (Tajima), $5-$10 per bottle of chalk.

Chalk Line

Top brands: Tajima, Irwin, Stanley, Milwaukee, DeWalt, Johnson, Empire,

A chalk line (also called a snap line) is a simple but essential layout tool that creates long, straight reference lines

Read guide
Combination Square — Lumberama
Measuring & Layout
$10-$25 for basic (Empire, Stanley), $25-$50 for mid-range (iGaging, PEC), $80-$150 for premium (Starrett, Mitutoyo), $150-$300+ for 4-piece machinist sets.

Combination Square

Top brands: Starrett, iGaging, PEC, Empire, Mitutoyo, Brown & Sharpe, Wo

A combination square combines a 12-inch graduated rule with a sliding head that features both a 90-degree and 45-degree

Read guide
Framing Square — Lumberama
Measuring & Layout
$8-$15 for basic steel, $15-$25 for quality aluminum (Swanson, Stanley), $20-$35 for premium stainless or precision-ground, $30-$50 for kits with stair gauges.

Framing Square

Top brands: Swanson, Stanley, Johnson, Empire, Irwin, Starrett, Woodpeck

A framing square (also called a carpenter's square or steel square) is an L-shaped layout tool with a 24-inch body (blad

Read guide
Laser Level — Lumberama
Measuring & Layout
$20-$50 for basic point/line lasers, $50-$150 for self-leveling cross-line, $100-$300 for 360-degree green line, $200-$600 for rotary lasers, $500-$1,500+ for professional rotary systems.

Laser Level

Top brands: Bosch, DeWalt, Huepar, Leica, Stabila, PLS (Pacific Laser Sy

A laser level projects a perfectly level or plumb line of light across a room or job site, replacing chalk lines and spi

Read guide
Speed Square — Lumberama
Measuring & Layout
$5-$10 for basic 7-inch, $10-$20 for premium 7-inch (Swanson), $15-$25 for 12-inch models, $20-$35 for adjustable or specialty squares.

Speed Square

Top brands: Swanson (inventor), Johnson, Empire, Stanley, Irwin, Milwauk

The speed square (officially the Swanson Speed Square) is a versatile triangular layout tool that combines the functions

Read guide
Stud Finder — Lumberama
Measuring & Layout
$10-$25 for basic magnetic or edge-detect, $25-$50 for center-find electronic, $40-$80 for multi-scanner, $100-$200 for radar/full-wall scanners, $150-$300+ for professional radar scanners.

Stud Finder

Top brands: Franklin Sensors, Zircon, Bosch, Walabot, Milwaukee, DeWalt,

A stud finder is an electronic device that detects the location of wood studs, metal pipes, and electrical wiring hidden

Read guide
Tape Measure — Lumberama
Measuring & Layout
$5-$15 for basic tape measures, $15-$30 for quality 25-foot (Stanley FatMax, Milwaukee), $25-$40 for premium magnetic or self-marking, $30-$60 for specialty long tapes.

Tape Measure

Top brands: Stanley (FatMax), Milwaukee, DeWalt, FastCap, Komelon, Lufki

The tape measure is the single most used tool on any job site or in any workshop. A retractable steel blade marked with

Read guide
Torpedo Level — Lumberama
Measuring & Layout
$5-$10 for basic plastic models, $10-$20 for quality aluminum (Empire, Stanley), $20-$40 for premium magnetic (Stabila, Klein), $30-$60 for digital torpedo levels.

Torpedo Level

Top brands: Stabila, Empire, Klein, Milwaukee, DeWalt, Stanley, Kapro, I

A torpedo level is a compact spirit level (typically 6-9 inches long) designed to fit in a tool pouch or pocket for quic

Read guide

Hand Tools

Bar Clamps — Lumberama
Hand Tools
$10-$25 each for F-clamps, $20-$50 each for trigger clamps, $30-$60 each for parallel jaw clamps, $10-$20 per head for pipe clamp fixtures (plus pipe cost).

Bar Clamps

Top brands: Bessey (K-Body REVO), Jorgensen, Irwin (Quick-Grip), Jet (pa

Bar clamps are the workhorse of the woodworking shop, providing the clamping force needed for panel glue-ups, assembly,

Read guide
Chisel Set — Lumberama
Hand Tools
$15-$30 for basic 4-piece sets, $30-$70 for mid-range (Narex, Stanley Sweetheart), $60-$150 for premium sets (Irwin Marples Blue Chip), $150-$500+ for top-tier (Lie-Nielsen, Veritas, Japanese chisels).

Chisel Set

Top brands: Narex, Stanley (Sweetheart), Irwin (Marples), Lie-Nielsen, V

Wood chisels are essential hand tools for cutting, shaping, and refining joints, mortises, and detailed woodwork. A qual

Read guide
Finish Hammer — Lumberama
Hand Tools
$10-$20 for basic models, $20-$40 for quality steel (Estwing), $30-$60 for premium hickory-handled (Vaughan, Dalluge), $50-$100 for Japanese-style finish hammers.

Finish Hammer

Top brands: Estwing, Vaughan, Dalluge, Stanley, DeWalt, Craftsman, Stile

A finish hammer (also called a trim hammer or claw hammer) is a lighter-weight hammer with a smooth face and curved claw

Read guide
Framing Hammer — Lumberama
Hand Tools
$15-$30 for basic steel, $30-$60 for quality steel (Estwing), $50-$100 for fiberglass or premium steel, $150-$300 for titanium (Stiletto, Martinez).

Framing Hammer

Top brands: Estwing, Stiletto (Eastman), Martinez, Vaughan, Stanley, DeW

A framing hammer is a heavy, long-handled hammer designed for driving large nails into dimensional lumber during framing

Read guide
Hand Plane — Lumberama
Hand Tools
$10-$40 for vintage Stanley planes (flea markets), $30-$80 for new economy planes (Stanley, WoodRiver), $100-$200 for mid-range (WoodRiver, Bench Dog), $175-$400 for premium (Lie-Nielsen, Veritas), $300-$600+ for specialty planes.

Hand Plane

Top brands: Lie-Nielsen, Veritas (Lee Valley), Stanley (vintage #4, #5,

A hand plane is a woodworking tool that shaves thin layers of wood using a sharp blade (iron) set at an angle in a flat-

Read guide
Nail Set — Lumberama
Hand Tools
$3-$5 each, $8-$15 for a 3-piece set, $15-$25 for premium self-centering sets.

Nail Set

Top brands: Dasco, Mayhew, Stanley, Starrett, DeWalt, Irwin, Craftsman,

A nail set is a small, tapered steel punch used to drive finish nail heads below the wood surface without denting or mar

Read guide
Pipe Clamps — Lumberama
Hand Tools
$10-$20 per fixture set (head + tail), $8-$20 per length of 3/4-inch black pipe (24-60 inches), $20-$40 total per complete clamp setup.

Pipe Clamps

Top brands: Pony (Jorgensen), Bessey, Irwin, Pipe-Master, Yost, Craftsma

Pipe clamps are the most economical way to get long-reach clamping capacity for panel glue-ups and large assemblies. A s

Read guide
Pry Bar — Lumberama
Hand Tools
$5-$15 for basic flat bars, $10-$25 for wonder bars and cat's paws, $15-$40 for wrecking bars, $20-$40 for trim puller sets, $30-$60 for premium demolition sets.

Pry Bar

Top brands: Stanley, Estwing, Vaughan, DeWalt, Crescent, Irwin, Dead On,

A pry bar is a leverage tool used for pulling nails, separating joined materials, prying apart framing, and demolition w

Read guide
Spring Clamps — Lumberama
Hand Tools
$1-$3 each for small plastic clamps, $3-$8 each for medium metal clamps, $5-$15 for large heavy-duty clamps, $10-$25 for multi-packs of assorted sizes.

Spring Clamps

Top brands: Irwin, Bessey, Wolfcraft, DeWalt, Pony, TEKTON, Yost, ATE, C

Spring clamps (also called hand clamps or pinch clamps) are the simplest and fastest clamping tools available. A strong

Read guide
Wood Rasp — Lumberama
Hand Tools
$5-$15 for basic machine-made rasps, $15-$30 for Shinto saw rasps, $20-$40 for Nicholson pattern, $40-$80 for premium Microplane, $70-$200+ for hand-stitched (Auriou, Liogier, Gramercy).

Wood Rasp

Top brands: Auriou, Liogier, Shinto, Nicholson, Microplane, Gramercy (To

A wood rasp is a coarse hand tool with individually cut or punched teeth used for rapid shaping, sculpting, and smoothin

Read guide

Specialty Tools

Biscuit Joiner — Lumberama
Specialty Tools
$80-$150 for basic models, $150-$250 for mid-range (DeWalt, Makita), $200-$350 for premium models, $600-$800+ for Festool Domino (loose tenon — different but related concept).

Biscuit Joiner

Top brands: DeWalt, Makita, Porter-Cable, Ryobi, Lamello, Festool (Domin

A biscuit joiner (plate joiner) cuts crescent-shaped slots in mating workpieces to accept compressed wood biscuits. When

Read guide
Brad Nailer — Lumberama
Specialty Tools
$30-$60 for pneumatic, $80-$150 for basic cordless, $150-$250 for premium cordless (DeWalt, Milwaukee), $200-$350 for top-tier cordless kits.

Brad Nailer

Top brands: DeWalt, Milwaukee, Ryobi, Makita, Metabo HPT (Hitachi), Bost

A brad nailer drives thin 18-gauge brad nails for delicate trim, molding, and assembly work. The slender nail leaves a n

Read guide
Dovetail Jig — Lumberama
Specialty Tools
$40-$80 for basic half-blind only (MLCS, General), $100-$200 for mid-range combination (Porter-Cable 4216), $200-$400 for premium variable-spacing, $400-$800+ for top-tier (Leigh D4R, Leigh Super).

Dovetail Jig

Top brands: Porter-Cable, Leigh, MLCS, General Tools, Rockler, WoodRiver

A dovetail jig is a template-based device that guides a router to cut perfectly fitting dovetail joints — one of the str

Read guide
Finish Nailer — Lumberama
Specialty Tools
$60-$120 for pneumatic, $120-$200 for basic cordless, $200-$350 for premium cordless (DeWalt, Milwaukee), $250-$450 for professional kits.

Finish Nailer

Top brands: DeWalt, Milwaukee, Metabo HPT, Makita, Bostitch, Senco, Port

A finish nailer drives 15 or 16-gauge nails for installing baseboards, door casings, crown molding, chair rails, and oth

Read guide
Framing Nailer — Lumberama
Specialty Tools
$150-$250 for pneumatic, $250-$400 for cordless gas (Paslode), $300-$500 for battery-only cordless (DeWalt, Milwaukee), $100-$200 for budget pneumatic.

Framing Nailer

Top brands: DeWalt, Metabo HPT (Hitachi), Paslode, Milwaukee, Bostitch,

A framing nailer is a powerful pneumatic or cordless tool that drives full-size framing nails (8d, 10d, and 16d) at high

Read guide
Kreg Jig — Lumberama
Specialty Tools
$50-$70 for Kreg 320, $100-$130 for Kreg 520, $140-$170 for Kreg 720PRO, $350-$500 for Kreg Foreman, $40-$60 for Kreg Jig HD.

Kreg Jig

Top brands: Kreg (dominant market leader), Massca, Milescraft, General T

The Kreg Jig is the brand-name pocket hole jig system that revolutionized woodworking joinery. While 'pocket hole jig' i

Read guide
Paint Sprayer — Lumberama
Specialty Tools
$50-$100 for handheld cup sprayers, $100-$300 for entry airless (Graco Magnum X5), $300-$600 for mid-range airless, $200-$500 for turbine HVLP systems (Fuji Mini-Mite), $500-$1,500 for professional HVLP (Fuji Platinum), $500-$2,000+ for professional airless.

Paint Sprayer

Top brands: Graco, Wagner, Fuji, Apollo, Titan, DeWalt, HomeRight, Earle

A paint sprayer atomizes liquid coatings — paint, stain, lacquer, polyurethane, and more — into a fine mist that produce

Read guide
Staple Gun — Lumberama
Specialty Tools
$15-$30 for manual, $30-$60 for electric corded, $60-$150 for electric cordless, $80-$200 for pneumatic narrow crown, $150-$400 for professional pneumatic.

Staple Gun

Top brands: Arrow (T50 series), DeWalt, Bostitch, Stanley, Milwaukee, Ry

A staple gun drives U-shaped metal staples into wood, fabric, insulation, and other materials for fastening, tacking, an

Read guide
Wood Lathe — Lumberama
Specialty Tools
$100-$250 for mini lathes, $300-$700 for midi lathes, $700-$1,500 for full-size, $1,500-$4,000+ for premium heavy-duty lathes.

Wood Lathe

Top brands: Jet, Nova (Teknatool), Rikon, Laguna, Powermatic, WEN, Delta

A wood lathe spins a workpiece on a horizontal axis while you shape it with hand-held cutting tools. This ancient woodwo

Read guide
Wood Router — Lumberama
Specialty Tools
$60-$120 for compact/trim routers, $120-$200 for mid-size fixed or plunge, $180-$300 for combo kits, $200-$400 for full-size, $400-$700+ for premium (Festool).

Wood Router

Top brands: DeWalt, Bosch, Makita, Festool, Milwaukee, Ridgid, Porter-Ca

A wood router is one of the most versatile power tools in any workshop. It spins a shaped cutting bit at high speed to c

Read guide

Related Blog Posts