Safety Equipment
Respiratory
3M
$25-$50 respirator plus $10-$20/cartridge pair

Half-Face Respirator for Maximum Workshop Protection

A half-face respirator provides the highest personal respiratory protection for woodworking and finishing. Unlike disposable masks respirators use replaceable cartridges for particle filtration P100 at 99.97% or organic vapor protection or both. The reusable silicone face piece creates reliable seals for extended comfort.

Key Features

  • P100 filtration 99.97%
  • Organic vapor cartridge option
  • Reusable silicone face piece
  • Replaceable filter cartridges
  • Comfortable extended wear
  • NIOSH approved

Specifications

Rating: NIOSH P100 and/or OV | Filtration: 99.97% particles | Cartridges: particulate organic vapor combination | Face piece: silicone | Sizes: S M L

Best For

Spray finishing lacquer application oil-based staining sanding exotic woods epoxy mixing and any operation with chemical vapors.

Compatible Materials

N/A - personal protective equipment

Pros & Cons

Pros

  • ✓ Superior 99.97% filtration
  • ✓ Protects against dust and vapors
  • ✓ Reusable and economical
  • ✓ Comfortable silicone seal
  • ✓ Replaceable cartridges

Cons

  • ✗ Higher initial cost
  • ✗ Must replace cartridges
  • ✗ Can be warm
  • ✗ Requires clean-shaven face
  • ✗ Must be properly fitted

Installation Tips

Select correct size by measuring nose to chin. Install appropriate cartridges for the hazard. Place on face and tighten straps evenly. Perform positive and negative pressure fit check before each use. Replace cartridges when you smell contaminants. Clean face piece with soap and water after use.

Frequently Asked Questions