Hardware
Connectors
Simpson Strong-Tie
$1-$5 each

Hurricane Ties for Roof-to-Wall Wind Uplift Resistance

Hurricane ties are metal strap connectors securing roof rafters or trusses to wall top plates, creating a continuous load path from roof to foundation. Required in high-wind zones, they dramatically improve wind resistance at minimal cost.

Key Features

  • Resists wind uplift at roof-to-wall
  • Creates continuous load path
  • Required in hurricane zones
  • Installs with joist hanger nails
  • Single and double-sided models

Specifications

Material: Galvanized steel (G90 or ZMAX) | Models: H1
H2.5
H10
META | Uplift: 175 to 1500+ lbs | Lateral: 120 to 600+ lbs | Fasteners: 10d x 1-1/2in joist hanger nails

Best For

Rafter-to-top plate connections
Truss-to-wall connections
Hurricane zone construction
Roof retrofits for wind resistance

Compatible Materials

Dimensional lumber rafters
Engineered trusses
2x4 and 2x6 wall plates
Pressure-treated top plates

Pros & Cons

Pros

  • ✓ Extremely cost-effective wind protection
  • ✓ Simple nail-on installation
  • ✓ Published uplift values
  • ✓ Can retrofit to existing structures

Cons

  • ✗ Requires rafter-wall junction access
  • ✗ Must use specified nails
  • ✗ Difficult in tight attic spaces

Installation Tips

Install on both sides of each rafter at the top plate. Fill every nail hole. Bend tightly around rafter and plate. Do not skip any rafter location.

Frequently Asked Questions