Hardware
Brackets
Hillman
$2-$10 per packCorner Braces for Furniture and Light-Duty Reinforcement
Corner braces are small L-shaped or flat-angle metal brackets for reinforcing 90-degree joints in furniture, shelving, and cabinets. They add rigidity to joints that would otherwise rely solely on glue or fasteners.
Key Features
- Reinforces 90-degree furniture joints
- Flat and inside-corner styles
- Zinc-plated or brass finish
- Pre-drilled screw holes
- Sizes from 1in to 6in
Specifications
Material: Zinc-plated steel or brass | Styles: Flat corner
inside corner
T-plate | Sizes: 1x1in to 6x6in | Holes: Countersunk for #6-#10 screws | Finish: Zinc
brass
black
Best For
Furniture reinforcement
Shelf bracket support
Picture frame assembly
Cabinet corner bracing
Compatible Materials
Hardwoods
Softwoods
Plywood
MDF
Particle board
Pros & Cons
Pros
- ✓ Quick easy reinforcement
- ✓ Inexpensive in multi-packs
- ✓ Decorative finishes available
- ✓ No special tools required
Cons
- ✗ Not for structural loads
- ✗ Visible unless concealed
- ✗ Small sizes very limited strength
Installation Tips
Secure with screws long enough to bite into wood but not penetrate through. Use two braces per joint for maximum rigidity - one on each side if possible.
Frequently Asked Questions
Two for maximum rigidity (one each inside face). Single brace is fine for light-duty shelves.
Yes. Adding inside-corner braces plus glue to loose joints dramatically increases rigidity.